Clear-com Eclipse-PiCo User Manual download pdf (Page 53)

Clear-Com Communication Systems

Eclipse PiCo Matrix Instruction Manual

4-15

Figure 4-12: GPI-6 Application Examples

Figure 4-11 and Figure 4-12 show how to connect switches or contacts

using the power source provided by the GPI-6 module or powering

switches from external sources. Each input can be wired to be isolated

from each other as a further variation.

IMF-102 Interface Module Frame Wiring

The wiring of a GPI-6 interface that is placed in an IMF-102 interface

frame is the same as the wiring for a GPI-6 interface placed in an

IMF-3 interface frame. The only difference is that an IMF-102 interface

frame houses only two interfaces, and they are mounted horizontally

rather than vertically in the frame.

Refer to the respective manuals for these interfaces and frames in the

Eclipse manual set for more information.

Configuration

To define an input function, use the Eclipse Configuration System

program, as described in its manual.

WIRING TO A SECOND ECLIPSE MATRIX

The RJ-45 connector labeled “Base Loop” connects the Eclipse PiCo

matrix to a second Eclipse PiCo matrix’s “Base Loop” connector to

form one non-blocking 64 port Eclipse system.

To make this connection, use a specially constructed screened CAT-5

cable of maximum length 1 meter (3.28 feet). The cable is wired as

shown in Table 4-1.

GPI-6 I/O DB-9M

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 78 79

No comments

Clear-com Eclipse-PiCo User Manual Page 53