Clear-com Eclipse-PiCo User Manual download pdf (Page 43)

Clear-Com Communication Systems

Eclipse PiCo Matrix Instruction Manual

4-5

• Pair 4 is not used.

Figure 4-3: Wiring Matrix to 4-Wire Equipment Using RJ-45

Single-Pair Digital

Single-pair digital wiring is accomplished with double-shielded 24 AWG

conductor CAT-6E enhanced STP cable in the case of a DIG-2

interface or CAT5 cable for the AES-6-CX interface. Pair 1 transmits

and receives multiplexed digital and analog between the matrix frame

and the panel.

Note: Ensure that the “select” switch on the panel’s rear panel is

in the correct position for the intended use.

RJ-45 CONNECTOR

AT MATRIX PORT

RJ-45 PINOUT ON

4-WIRE EQUIPMENT

Matrix Frame RJ-45 Pin Numbers

Shielded category-5 cables wired pin-to-pin

4-Wire Pin Numbers

Pair 2

Pair 1

Pair 3

Pair 4

Not Used

Audio Input +

(into Matrix)

Audio Output +

(from Matrix

)

Audio Output –

(from Matrix)

Audio Input –

(into Matrix)

Not Used

Not used

Audio Output +

Audio Input +

Audio Input –

Audio Output –

Not Used

Pair 1

Audio output from Matrix to 4-Wire

Pair 2

Not used

Pair 3

Audio input from 4-Wire to Matrix

Pair 4

Not used

Views from

front of

connectors

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 78 79

Comments to this Manuals

No comments

Clear-com Eclipse-PiCo User Manual Page 43

Comments to this Manuals

Related products and manuals for Accessories communication Clear-com Eclipse-PiCo