Clear-com Eclipse-PiCo User Manual download pdf (Page 39)

Clear-Com Communication Systems

Eclipse PiCo Matrix Instruction Manual

4-1

INSTALLING AN ECLIPSE

PICO MATRIX

VERIFYING THE SHIPMENT

When the Eclipse PiCo system is received inspect the boxes for

shipping damage. Report any shipping damage to the carrier. The

Eclipse PiCo distributor is not responsible for shipping damage.

Check the packing list and verify that every item on the list has been

received. Save all packing materials in the event any items need to be

returned.

UNPACKING THE SYSTEM

The system will include an Eclipse PiCo matrix which contains the

hardware, and the software for the system. The user will need to

supply:

• A standard 19 inch wide (48.26 cm) Electronics Industry Association

rack in which to install the matrix.

• A personal computer to run the Eclipse Configuration System

programming software (ECS). The Eclipse Configuration System

software runs on Windows 2000, Windows XP, Windows Server

2003 and Windows Vista (with restrictions). When running ECS on

Windows operating systems, the client and server can run on

separate machines connected over a network.

• Shielded category-5 cables to connect to panels and interfaces.

INSTALLING THE ECLIPSE PICO MATRIX

The following overview gives a summary of the steps required to install

an Eclipse PiCo matrix. More detailed information on each step is

provided in the sections that follow.

To install an Eclipse PiCo matrix:

1. Remove the Eclipse PiCo matrix from its shipping carton.

2. Place the matrix in a standard Electronic Industry Association

equipment rack.

3. Leave at least 2 inches (51 mm) of clearance on all sides of the

matrix to ensure proper airflow. Do not block ventilation vents.

4. Connect the power supplies to AC mains power using the IEC

connectors on the matrix’s rear panel. The matrix has two separate

AC power entry connectors for the two separate power supplies in

the system.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 78 79

No comments

Clear-com Eclipse-PiCo User Manual Page 39