Clear-com Eclipse-PiCo User Manual download pdf (Page 50)

Clear-Com Communication Systems

Eclipse PiCo Matrix Instruction Manual

4-12

Figure 4-9: Rear View of IMF-3 Frame

To External Device

To connect external devices to the RLY-6 interface, use the two DB-9M

connectors on the rear cable assembly panel for the interface. Figure

4-10 shows the pin assignment of these connectors as viewed from

the matrix side of the connector.

If a DB-9F is plugged into the connector labeled CH. A I/O, relays 1 to

3 are available on that connector. The connector labeled CH. B I/O has

the contacts for relays 4 to 6. In Figure 4-10, the labels on the pins

apply to either connector. Example: #1/4 COM refers to the wiper of

relay 1 if it is connected to CH. A and the wiper of relay 4 if it is

connected to CH. B.

Ports

Rear View of IMF-3 Frame

GPI/RLY

Interface

Connector

RJ-45 RJ-45 RJ-45 RJ-45 RJ-45

DB-9 DB-9 DB-9 DB-9 DB-9

RJ-45 RJ-45 RJ-45 RJ-45 RJ-45

DB-9 DB-9 DB-9 DB-9 DB-9

Other

Interfaces

RLY-6

GPI-6

RLY-6

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 78 79

No comments

Clear-com Eclipse-PiCo User Manual Page 50