Clear-Com Tempest 900 Specifications download pdf (Page 48)

42 Tempest®900 4-Channel Wireless Intercom System

Pairing with a BaseStaon

Pair BeltStaon to BaseStaon:

Conrm that the BaseStaon is powered ON and in Operaonal Mode (not

in Menu Mode) and that the BeltStaon is powered OFF. Conrm that the

BaseStaon’s Network Number and Lockout Key are adjusted as needed. See the

secon on Set Network Number and Lockout Key.

Plug one end of the pairing cable into the BaseStaon and the other end into the

BeltStaon.

The pairing cable is a standard 3.5mm

(1/8 in.) male to male stereo patch cord.

Turn the BeltStaon power ON by pressing and holding the BeltStaon Power ON/OFF buon for two seconds. The pairing

process will begin automacally. Watch for the message “Pairing Complete” to appear briey on the BeltStaon display.

The BeltStaon will automacally re-inialize.

Adjust BeltStaon Slot

The BaseStaon Slot Assignment only aects the order that the BaseStaon Operaonal screen displays the BeltStaon

informaon when the BaseStaon is in the Stac display mode. If the BaseStaon is rounely used as a communicaon port

or for monitoring BeltStaons, it may be more convenient to always have the same user appear in the same posion on the

BaseStaon display. This is a personal preference seng.

In the BaseStaon “Tech Menu,” choose Stac or Dynamic from the “Display Slot Assignments” screen. Dynamic, the default,

will work without any adjustment, and always displays BeltStaons in alpha-numeric order by name.

Stac will be the preferred choice for users who are using only one BaseStaon and want to ensure that a BeltStaon that is

logged in will always appear in the same locaon (slot) on the BaseStaon display. When selecng Stac slot assignments,

you must also enter the Tech Menu for each BeltStaon and assign each BeltStaon a dierent slot (1 – 5).

The BaseStaon default is for Dynamic Slot Assignment. This means that when BeltStaons log in to a base, the informaon

about the BeltStaons is displayed on the BaseStaon LCD screen in alpha-numeric order according to the name of

the BeltStaon. For example, “Dir” appears before “Light1,” which appears before “StgMgr,” but they can change slots

depending on which BeltStaons are turned ON. If the default sengs are used, nothing is necessary. If the BaseStaon

is located in an equipment room and is not rounely used as a communicaon port or to manage BeltStaons, nothing is

necessary. Adjusng so that each BeltStaon always appears in the same posion of the BaseStaon display is a two step

process:

1. Advance to the BaseStaon’s “Display Slot Assignment” secon of the “Tech Menu” and select Stac.

2. In each BeltStaon, advance to the “Base Slot” secon of the “Tech Menu” and adjust each BeltStaon to a dierent

slot (1 – 5). The BeltStaon designated to slot 1 will always appear on the far le of the BaseStaon display, with slot 2

appearing in the next posion to the right, and so on.

4-channel and 2-channel BeltStaons may be paired to either model

BaseStaon(s); When a 4-channel BeltStaon is paired with a 2-channel

BaseStaon operaon of that BeltStaon is limited to channels A/B and can

only hear one channel at a me.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 101 102

No comments

Clear-Com Tempest 900 Specifications Page 48