Clear-Com Tempest 900 Specifications download pdf (Page 24)

18 Tempest®900 4-Channel Wireless Intercom System

6- Local Area Network (LAN) RJ-45 Connector

The Local Area Network (LAN) RJ-45 Connector is used to connect the Tempest BaseStaon to a user supplied PC running

Tempest Desktop Conguraon (T-Desk®) soware. The user can then monitor and/or adjust BaseStaon and BeltStaon

sengs via the PC interface. This connecon can be made directly or through a Local Area Network (LAN). See the separate

T-Desk User Manual for more informaon.

7- Relay Connector

The Relay Connector provides access to all of the relay closure contacts for the Tempest BaseStaon. There are six

relays including one common Stage Announce relay and ve individually assignable relays - one for each of the wireless

BeltStaons. See the secon on “GPO Relay Contacts.

8- Antenna Connector

The Antenna Connector is used to connect the antenna to the Tempest BaseStaon. The Antenna Connector is an RP-TNC

(Reverse Polarized-TNC) connector. Cables used to aach to this Antenna Connector must be properly terminated with

mang RP-TNC connectors and the proper cable type.

9- Remote Transceiver RJ-45 Connector

The Tempest Remote Transceiver RJ-45 connector is used to connect the oponal remote transceiver to the Tempest

BaseStaon. The remote transceiver can be located up to 1,500 feet from the BaseStaon.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 101 102

No comments

Clear-Com Tempest 900 Specifications Page 24