Clear-Com Tempest 900 Specifications download pdf (Page 45)

39 Tempest®900 4-Channel Wireless Intercom System

BeltStaon Setup

The BeltStaon can be congured in three ways. It can be congured by the BeltStaon menu, wirelessly by the BaseStaon

menu, or using the PC interface called T-Desk. While many funcons are available through all three methods, certain

features are only available through the BeltStaon. See T-Desk manual for details on conguring by PC.

Congure the BeltStaon by the BeltStaon Menu

Using a combinaon of controls and Menu sengs, you can set a variety of levels and opons directly from the BeltStaon

controls. The mulpurpose “CH A/B” and “CH C/D” controls operate dierently depending on the mode of the BeltStaon.

In Operaonal Mode, rotang the control adjusts the volume of the audio of the local headset connected into the boom of

the BeltStaon. Turning the Volume control clockwise increases the audio level while turning the control counter clockwise

decreases the level.

Pressing the “CH A/B or “CH C/D” changes the selected intercom between A or B and C or D respecvely. The intercom

channel selected is indicated by the Channel Indicator LEDs located on the outer edge of each talk buon, “TALK A/B” and

“TALK C/D.”

In Menu Mode, turning either Volume control allows the user to scroll through the menu opons of the current menu

screen. Pressing either control selects the current menu opon and is the same as pressing ENTER. A menu item is not

selected and will not take aect unl the control, or ENTER, is pressed.

For example, to adjust the Sidetone seng:

• Connect a headset to the BeltStaon.

• Press MENU to enter Menu Mode.

• Rotate the Volume knob and scroll to “Set Controls.”

• Press ENTER to select, and scroll to “Sidetone.”

• Press ENTER to select the “Sidetone” adjustment.

Sidetone is expressed in Decibels (dB). You will see a level indicator with a numeric value between -30dB to -6dB. You should

speak into the headset microphone at a normal speaking level and adjust the sound of your own voice to a comfortable

level by rotang either volume knob to adjust the Sidetone level. When sased, press ENTER to save the adjustment. Press

MENU to move up one level in the menu tree. Press MENU repeatedly to exit Menu Mode and return to Operaonal Mode.

If no other items are selected, Menu Mode will automacally exit and return to Operaon Mode aer a few seconds.

For addional informaon on the available BeltStaon menu sengs, see the menu tree diagram and details in this manual.

Congure the BeltStaon by the BaseStaon Interface

Many of the sengs of the BeltStaon can be adjusted wirelessly from the BaseStaon. On the BaseStaon, press MENU,

select BeltStaon Sengs, and scroll to the required opons. This feature allows the communicaons engineer to control

many of the BeltStaon’s funcons without the need to remove the BeltStaon from the user. As an example, to adjust the

Baery Alert on a BeltStaon from the BaseStaon:

• On the BaseStaon, press MENU to enter Menu Mode

• Rotate the Volume knob to scroll to “BeltStaon Sengs” and press ENT.

• Select the BeltStaon to be adjusted and press ENT.

• Scroll to “Baery Alert” and press ENT to select the “Baery Alert” adjustment.

You will see opons for ON and OFF. Rotate the “Volume” knob to select your preference and press ENTER to select. Conrm

the selecon on the BeltStaon display. Press MENU to move up one level in the menu tree. Press MENU repeatedly to exit

Menu Mode and return to Operaonal Mode. If no other items are selected, Menu Mode will automacally exit aer one

minute.

For addional informaon on the BeltStaon menu sengs, available from the BaseStaon menu, see the BaseStaon

menu tree diagram in this manual.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 101 102

Comments to this Manuals

No comments

Clear-Com Tempest 900 Specifications Page 45

Comments to this Manuals

Related products and manuals for Two-way radios Clear-Com Tempest 900