Clear-Com Tempest 900 Specifications Page 33
- Page / 102
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
27 Tempest®900 4-Channel Wireless Intercom System
Remote Transceiver
Setup the Transceiver
• Choose a BaseStaon locaon.
• Choose a Transceiver locaon.
• Choose an antenna conguraon.
• Install CAT-5 cable and connect to the BaseStaon and Transceiver.
• Conrm operaon by observing the Transceiver LEDs.
The Tempest Remote Transceiver is an oponal accessory that allows antennas to be located up to 1,500 feet away from
the BaseStaon without the RF signal loss that is associated with using long runs of coaxial cable.
The Tempest Remote Transceiver connects to the rear of the BaseStaon with standard CAT-5 wiring with RJ-45 connectors.
Note that there are two RJ-45 connectors on the back of the BaseStaon and they are not interchangeable. The second
RJ-45 is for a LAN connecon.
» Install the BaseStaon in a convenient locaon.
» Install CAT-5 cable so that it is protected from electronic interference as much as possible.
» Install the Transceiver and antennas in a locaon that provides the best RF coverage.
» Connect the CAT-5 cable to the BaseStaon and the Transceiver.
» When the BaseStaon detects the presence of the Transceiver, there is a brief automac conguraon process
before the Transceiver takes over the radio funcon from the BaseStaon.
There is one RP-TNC antenna connector on the top of the
transceiver, allowing for connecon of a half wave antennas
or alternate antenna conguraons. Always ensure that the
antenna is securely connected for proper system operaon.
The Transceiver antenna connectors are made to be water
resistant, so outdoor use is acceptable. The cable connecons
on the boom of the transceiver are not water ght, so
always protect from immersion. In severely blowing rain, it
may be prudent to protect with an RF transparent cover such
as a Ziploc bag.
Coaxial cable may be used to connect alternave
antenna opons.
Power cycle the BaseStaon when connecng/
disconnecng the Remote Transceiver. (When
power cycling, turn o the power to the
BaseStaon and wait 10 seconds before turning
it back on.) Failure to power cycle may result in
errac operaon.
See the Antenna Conguraon secon.
Part # CCT-9RT
- 399G079 Rev A 11-July-2014 1
- Thank you from Clear-Com 3
- Document Reference 4
- Legal Disclaimers 4
- Clear-Com Contacts 4
- Table of Contents 5
- Important Safety Instrucons 7
- A/C Power Warning 8
- Baery Safety 9
- Maintenance and Care 10
- Quick Start Guide 12
- Theory of Operaon 14
- What’s In The Box 16
- XLR-3M/F for 2-Wire 17
- RJ-45 to RJ-12 Adapter 17
- BaseStaon Overview 18
- 8- Menu Buon 19
- 9- Enter Buon 19
- 10- Buons 1 - 5 19
- 7- Volume Control 19
- Front Panel Right 20
- Rear Panel Le 22
- Rear Panel Right 23
- 7- Relay Connector 24
- 8- Antenna Connector 24
- BeltStaon Overview 25
- Talk Buon A/B and C/D 27
- Transceiver Controls 28
- BaseStaon Setup 29
- Power Connecons 30
- Powering ON the BaseStaon 30
- Antenna Locaon 31
- Antenna Conguraons 32
- Remote Transceiver 33
- Congure the BaseStaon 35
- Adjust Sidetone 36
- Selecng a Frequency Band 36
- Name Each Staon 39
- Front Panel Lock 41
- Call Funcon 41
- Stage Announce (SA) 41
- GPO Relay Contacts 42
- Acve Channel Relay 42
- Auxiliary Output 43
- Reset Memory 43
- BaseStaon Menu 44
- BeltStaon Setup 45
- Power Opons 47
- BeltStaon Power ON/OFF 47
- Pairing with a BaseStaon 48
- Name Equipment 49
- Personal Preferences 49
- Program Volume Control 50
- Set Mic Gain 51
- Single Channel Mode 51
- Wireless ISO 52
- BeltStaon Menu 53
- Controls 55
- RJ-45 Jacks 56
- 2-Wire (Party-Line) Interface 57
- Auto-Null Explained 58
- Auto-Null Procedure 58
- Test for Echo 58
- Manual Null 59
- Other Causes of Echo 59
- 2-Wire Wiring Schemes 60
- Modes of Operaon 61
- Split Mode 62
- Connecng Mulple BaseStaons 63
- Accu-Sync 66
- Master Mode 67
- Note: The LQ value being 68
- How Do I …? 70
- Use the Transceiver 72
- Troubleshoong 74
- BeltStaon 76
- Tempest Remote Transceiver 77
- Default Sengs 78
- Tempest Part Numbers 79
- System Features 80
- 900 MHz System Specicaons 81
- BaseStaon Specicaons 82
- BeltStaon Specicaons 83
- Glossary 85
- Mini-USB-B 87
- Radio Compliance 88
- Limited Warranty 90
- Technical Support 92
- Tempest Block Diagram 96
Related products and manuals for Two-way radios Clear-Com Tempest 900
(16 pages)© 2020, manymanuals.com. All rights reserved. | 2.572 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals