Clear-Com HME DX210 Operations Instructions download pdf (Page 23)

5 Technical Data

5.1 BS210 Base Station Specifications

GENERAL

Channels:

2 audio channels

Frequency Range:

2400 – 2483.5 MHz

Frequency Response:

200 Hz to 3.5 kHz

Power Requirements:

100-240VAC, 50-60Hz or 12-14VDC

Temperature Range:

32-122°F (0-50°C)

Size:

19” x 1.72” x 17.13” (1-RU) (48.26 x 4.37 x 43.51 cm)

Weight:

9.0 lbs. (4.1 kg) maximum

# of COMMUNICATOR

per Base:

15 can be registered.

In single-channel operation, 4 can have simultaneous full-duplex communication.

In dual-channel operation, 3 can have simultaneous full-duplex communication.

4-Wire I/O:

RJ45, 600 balanced, level adjustable, simultaneous operation with 2-wire

2-Wire I/O:

XLR-3M, XLR-3F, externally-switchable RTS

or Clear-Com

mode,

200, level adjustable, null adjustable to 50dB attentuation, typical

Auxiliary Input:

XLR-3F/¼” (6.35 mm) combo jack, 600 balanced, level adjustable

Auxiliary Output:

XLR-3M, 600 balanced, level adjustable

Headset Connector:

4-pin mini-DIN, Electret microphone

Headset Output:

200mW into 32

Antenna Type:

External ½ -wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity

System Distortion:

<2%

Communication Security:

64-bit encryption, dual-slot diversity

BASE STATION TRANSMITTER

Type:

Frequency Hopping, Spread Spectrum (FHSS)

Transmit Power:

100mW burst

Modulation Type:

Gaussian filtered FSK, TDMA

Frequency Stability:

13 ppm

Harmonics/Spurious:

Exceeds FCC and ETSI specifications over temperature

BASE STATION RECEIVER

Type: RF Sensitivity:

Frequency Hopping, Spread Spectrum <-90dBm w 10-3 BER

Frequency Stability:

13 ppm

Distortion:

<2%

Clear-Com HME DX210 System Guide

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comments to this Manuals

No comments

Clear-Com HME DX210 Operations Instructions Page 23

Comments to this Manuals

Related products and manuals for Door intercom systems Clear-Com HME DX210