Clear-com ICS-2003 User Manual download pdf (Page 16)

Clear-Com Communication Systems

ICS-2003 Intercom Panel Instruction Manual

1-8

Mic Select Button

This button selects the panel or headset microphone. If a headset is

plugged in, the panel will automatically switch to headset microphone

operation. If the headset is unplugged, the panel will automatically

switch back to panel microphone operation. The LED to will be on

when the panel microphone is active.

Listen Level Button

The Listen Level button has four functions:

• Activating the listen-level mode

• Resetting the listen-level settings

• Sending call signals

• Releasing auto-answered telephone lines

Listen-Level Mode

To use the listen-level adjust mode:

1. Push (for less than 1 second) and quickly release the “Listen Level”

button.

2. “Listen Level Adjust Mode” will appear in the message window to

indicate the function is on and the LEDs of all active listen selectors

will begin to flash.

Note: Only active selectors can be adjusted in listen-level mode.

3. Use the selector associated with the intended label to increase (up)

or decrease (down) the volume.

4. To exit, push the “Listen Level” button or wait for the 3 second

time-out.

Listen Level Reset

To reset the Listen Level to default settings:

1. Press (for less than 1 second) and quickly release the “Listen Level”

button.

2. Press and hold the “Listen Level” button for 3 seconds.

3. Release the “Listen Level” button.

Call Signals

To activate a call signal push and hold (for at least 1 second) the

“Listen Level” button until the panel indicates it is in “Call Signal” mode.

The call signal will be sent each time the selector with that label

assignment is pushed down and will remain so until the call-signal

mode times out (about 5 seconds).

Call signals can be issued to any talk label assigned to a panel’s

talk/listen selectors. If more than one label is assigned to a selector, all

labels will receive the signal. If a label is a fixed group, the entire group

will receive the call signal. If the label is a party line, then every panel

listening on the party line will receive the call signal.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 96 97

Comments to this Manuals

No comments

Clear-com ICS-2003 User Manual Page 16

Comments to this Manuals

Related products and manuals for Accessories communication Clear-com ICS-2003