Clear-com HME DX100 User Manual download pdf (Page 29)

▲ and ISO

NOT

SPEAKER STATION OPERATIO

Headset Connection

Headset

connector

If you are using a headset with the WS200, plug it into the headset connector. When using a headset, if the

red light over the SPEAKER button is on, incoming communication can be heard through the headset and

the speaker. If the red light over the SPEAKER button is off, incoming communication can only be heard

through the headset.

Push-To-Talk (PTT) or Hands-Free (HF) Mode Setting

• Be sure the WS200 power is off.

• To set up the WS200 for operation in the PTT mode, press and hold the VOLUME down ▼ and ISO

buttons while you press and release the POWER button to turn the unit on. Then release the

VOLUME down ▼ and ISO buttons.

• To set up the WS200 for operation in the HF mode, press and hold the VOLUME up

buttons while you press and release the POWER button to turn the unit on. Then release the

VOLUME up ▲ and ISO buttons.

E: Mode settings are saved in memory, and only need to be reset if you want to change between PTT

and HF operation. Mode settings affect both ISO and IC communication.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35

No comments

Clear-com HME DX100 User Manual Page 29