Clear-com HME DX100 User Manual download pdf (Page 27)

ATION

he Headset control buttons will activate when pressed lightly.

Press and release the power button on the inside

say

•

ume-down T

• ode — To set the Headset for HF communication, with the power off, press and hold

•

ocked out, with the power off, press and

off, press an old the ISO

•

and transmit lights from coming on during headset operation,

NOTE: n

f and

le.

•

ease

own for more

NOTE: In HF mode, pressing the IC1 or IC2 button while latched in ISO will latch on IC. Pressing the ISO

button while latched in IC will latch on ISO.

WH200 HEADSET OPER

Use your fingertips, not your fingernails, to press the buttons.

Power On/Off

• Power On —

of the Headset housing. A voice message in the earpiece will

“Power on, Headset #, Version #” and the power light will go on.

The REGISTRATION STATUS indicator on the base station will

momentarily indicate the Headset ID number.

Power Off — Press and hold the power button for approximately

3 seconds. A voice message in the earpiece will say “Power off,”

and the power light will go off.

ISO (Isolate) and IC (Intercom)

Use the ISO button to communicate with other Headset/Beltpac/Speaker Station

causing the ISO button to function the users. The ISO feature can be locked out,

same as the IC button.

Use the IC1 or IC2 button to communicate via the intercom channel.

• Push-To-Talk (PTT) Mode — To set the Headset for PTT

communication, with the power off, press and hold the vol and

ISO buttons while you press and release the power button. You will hear

“Power on, Headset #, Version #, Hands-free off” in the earpiece. Press and hold the IC1, IC2 or ISO button

while talking.

Hands-Free (HF) M

Power

utton

Power

ligh

Transmit

light

the volume-up S and ISO buttons while you press and release the power button. You will hear “Power on,

Headset #, Version #, Hands-free on” in the earpiece. When set up for HF communication, the Headset c

be operated in either HF or PTT.

ISO Lockout Mode — To set the Headset with the ISO feature l

hold the

IC1 button while you press and release the power button. You will hear “Power on, Headset #, Version

#, ISO off” in your Headset earpiece. When set up for the ISO Lockout mode, the ISO button will operate

the same as the IC1 button, in either hands-free or PTT communication.

To reset the ISO feature for normal ISO button communication, with the power d h

and

IC1 buttons while you press and release the power button. You will hear “Power on, Headset #, Version #,

ISO on” in your Headset earpiece.

Lights-off Mode — To prevent the power

press and hold the IC2 button while you press the power button to turn the headset on.

To return the lights to their normal functions, turn the power off and on again without pressing the IC2 button.

The above settings are saved in memory and only need to be repeated when you want to change betwee

HF and PTT operation. When changing modes, if both power lights begin blinking, turn the Headset of

begin again. HF and PTT mode settings affect both IC and ISO. Individual adjustment is not possib

• Push-To-Talk (PTT) Mode Operation — Press and hold the IC1, IC2 or ISO button while speaking

In PTT operation, audio will be transmitted only while you are pressing the IC1, IC2 or ISO button.

Hands-Free Mode (HF) Operation — Quickly press and release the IC or ISO button to “latch” the

transmitter on in the HF mode. Talk and listen, as in a normal telephone conversation. Press and rel

the IC or ISO button again to “unlatch,” to end the conversation. If either button is held d

than a half second, the Headset will function as PTT. All Headsets/Beltpacs/Speaker Stations can be

unlatched by the base station operator, by pressing the UNLATCH button on the base station.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Comments to this Manuals

No comments

Clear-com HME DX100 User Manual Page 27

Comments to this Manuals

Related products and manuals for Accessories communication Clear-com HME DX100