Clear-com V12PDDXY User Manual Page 150

  • Download
  • Add to my manuals
  • Print
  • Page
    / 187
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 149
The pinout for the CAT5 cable to connect a DIG-2 interface to a V-Series panel T-Adapter
interface is given below.
Pin
Wire color
Description / function
1
White/Orange
not used
2
Orange
not used
3
White/Green
not used
4
Blue
Tx/Rx (+)
5
White/Blue
Tx/Rx (-)
6
Green
not used
7
White/Brown
not used
8
Brown
not used
Table 37: DIG-2-6 to panel wiring (T-Adapter interface)
The T-Adapter interface RJ45 connection is capable of operation with up to 3000m
(10,000ft) of screened 24 AWG Cat5e cabling of 110 ohm +/- 10 ohm impedance
If 26 AWG screened CAT5e cable is used the maximum cable run is reduced to 2,200m
(7,300ft).
Note:
A ferrite core must be added to the socket end of each cable. A suitable ferrite core is Würth
Electronik part: 74271132.
7.2.17 LAN connector
The LAN connector is an industry standard RJ45 socket that enables you to connect the
panel to either a network or the ethernet port of a PC. The LAN connection is reserved for
panel firmware upgrades and future use.
Figure 179: LAN connector pinout
150
V-Series Panels User Guide
Page view 149
1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 186 187

Comments to this Manuals

No comments