Clear-com HX System Frames User Manual download pdf (Page 122)

11 Maintaining the

Eclipse HX-Omega

The Eclipse HX-Omega matrix system connects a complex network of microprocessor

controlled devices.

Due to the complexity of the system, field service should be limited to isolating a problem to

the specific circuit board that may be causing the problem. Once the circuit board has been

identified, it can be either repaired or replaced.

Tip: For an overview of the Eclipse HX-Omega matrix, see 3 Overview.

Servicing instructions are for use by qualified personnel only. To reduce the risk

of electric shock, do not perform any servicing other than that described by this

guide, unless qualified to do so. Refer all servicing to qualified service

personnel.

11.1 Routine maintenance recommendations

11.1.1 Cleaning the matrix)

Because the matrix has moving air in it, the entire matrix should be cleaned at least once a

year. To clean the matrix, shut off AC power, remove all cards, and use compressed air to

remove any dust buildup in the matrix itself. Clean all cards with a brush to remove dust

buildup.

Care should be taken not to induce a static discharge in the cards. Use

of a grounding wrist strap is recommended. If a grounding wrist strap is

not available, touch an unpainted metal surface on the matrix chassis

periodically to neutralize static electricity.

122

Eclipse HX-Omega Matrix User Guide

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 144 145

No comments

Clear-com HX System Frames User Manual Page 122